Design and Made in the USA
Z-Axis Autofocus for Laser Machines
$17.00 – $150.00
Proud to release our New Z-Axis Autofocus, Xtool users must have Devil1 mod by GeeksAtLarge to be able to use this tool, get your focus spot on always and increase cutting depth, and create amazing deep engravings.
Z-Axis Autofocus for Laser Machines (Lightburn)
Get your focus perfect every time and unlock advance features in Lightburn that will open a world of new ideas for you.
With our Z-Axis Autofocus. Lower your laser per pass to obtain an amazing deep engraving or deeper cuts. YES! You can cut thicker material now. 67mm of automatic Z travel and an extra 110mm of manual adjustment to ensure reach, with an all metal-built mechanism, plastic dovetail, and a spring-loaded clamp mount design to avoid slide and reduce vibrations.
Automatic focus or manual? You choose! A simple calibration process in Lightburn via macro allows you to create different focus conditions based on your needs or modules.
See it in action here: Owners Group Facebook Link
Download your Devil1 configuration files made by Geeks At Large
Macro For Lightburn
Use right click over the macro to edit the name and add the following commands. Afterwards, click ok to save.
Name Focus
G38.3 Z-300 F300
G91 G1 Z7.1 F300
PLEASE NOTE THAT IN SECOND LINE “Z7.1” IS THE VALUE WE NEED TO CALIBRATE. REFER TO THE INSTALLATION VIDEO FOR MORE INFO.
Make sure you are using mm and no inch. in order to get a proper movement.
If you are using Inch/minute you need to convert the numbers on the macro to work properly.
Understanding how the macro is working
First Line.
G38.3 probes towards a target and stops on contact.
Z-300 Is the axis that will move with G38.3
F300 is the speed for the Z-Axis
Second Line
G91 Set the position when the sensor touches the material to relative.
G1 Z7.1 Move to 7.1mm on the Z-Axis away from the material
F300 is the speed for the Z-Axis
The material sensor is a breeze to install according to your module, with an ultra-strong adhesive and a quick disconnect cable for easy and fast laser module swap. Additional sensors sold separately.
With high torque and a fast stepper, our clamp system holds your module and move smoothly, making this autofocus the best alternative to transform your Xtool D1 or any other laser into a high-end laser engraving machine.
What’s in the box?
- Z-Axis Autofocus System
- 1 Probe Material Sensor
- Probe Sensor Cable
- Z-Axis Cable
Additional information
| Weight | 28 oz |
|---|---|
| Dimensions | 9 × 3.5 × 2.5 in |
Share your thoughts!
Let us know what you think...
What others are saying
Product Enquiry
Related products
-
Laser Accessories, D1 NonPro Series, D1 Pro Series, Jigs/Fixtures and Tools, Tools
$25.00 – $40.00 Select options This product has multiple variants. The options may be chosen on the product page -
Laser Accessories, D1 Pro Series
$85.00 – $105.00 Select options This product has multiple variants. The options may be chosen on the product page -
-
Joseph Moser (verified owner) –
This is the very best addition I have made to my Xtool/devil1!
I have tremors in my hands and cannot feel my fingers… This auto focus has made it to where I do not have to touch my Module in order to focus… This is awesome!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mark Bigham –
Once set up it works flawlessly. I have been able to reduce power for cutting and reduce passes to accomplish clean cuts. This is a must have.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brandon Holliday (verified owner) –
Amazing product with outstanding customer service works very well
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
David Strouse (verified owner) –
This product works great. Great support. After having issues, David personally walked me through getting it set up.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Julie M Haubert (verified owner) –
I have been testing this autofocus and feel I can finally leave a thorough review. To start with, the first one I ordered, the post office must have run over with a truck as it was heavily damaged on arrival. Daniel was quick to reprint a new one and get it to me within a week. The autofocus is a little technical to set up, but doable even for an artsy type person like me. Also, when I had questions, Daniel was quick to respond and walk me through the troubleshooting until it was fixed.
For the performance, it almost works perfectly to focus. There have been two to three times where a glitch on pushing the macro button the autofocus has ended up moving all the way to the top. I usually stop it and reboot the Devil1 and then it works normally. The real advantage that I find is on programming the steps down on each pass. I now can save a pass or two on cutting because the focus changes on each pass. If you’re going through something really thick, however, make sure to calculate the number of steps times the passes or the sensor may drag on the board. Not that I did that or anything….
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Richard Bruner (verified owner) –
This makes focus so much easier and exactly the same every time. I have it set up for two different laser heads.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Keith Gray (verified owner) –
Works great So much better than fighting the little thumb screw on the side.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Steve Ferguson –
I plan on purchasing this as soon as possible along with the devil1. Daniel’s eye and strive for perfection is why I will purchase from him. I’ll leave another review after I purchase
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal