Honeycomb Material Holding Pins

$4.50$41.00

Honeycomb Material Holding Pins.

Designed to hold down and help your materials to stay in place during cutting and engraving. These pins have a low profile and a loop ring to help you remove them from your honeycomb, avoiding damage to the honeycomb cells and eliminating the need to use tools.

Please double check you honeycomb cell size and select yours below.

Black prints may be made using gray or red, depending on market availability, as black filament is currently in limited supply.

Here is a quick video on how will work and what you need

How to Use

(44 customer reviews)

Guaranteed Safe Checkout

Xtool’s honeycomb are 8mm cell size, some people got a Xtool Honeycomb with a 11mm cell size. See photos to find how you measure yours.

Honeycomb Material Holding Pins.

Designed to hold down and help your materials to stay in place during cutting and engraving. These pins have a low profile and a loop ring to help you remove them from your honeycomb, avoiding damage to the honeycomb cells and eliminating the need to use tools.

There are to versions, standard and long neck.

  • Standard pins: holds up to half inch of material, this are ideal for cut earrings, layered frames, coasters, tiles and more!
  • Long neck pins: hold up to 1 inch thickness, ideal for engraving cutting boards, signs, canvases etc.

How to use:

Set your material and aligned on your honeycomb. Use the pins to securely set you material in a fixed position. Using a straight push down not diagonal or sideways, (you can rotate them) to get the best location and avoid any interference with your artwork.

Taking the pins out: use the metal loop from the pin to pull you pins straight up, don’t use tools or anything that can damage you honeycomb cells. with a straight vertical pull from the honeycomb, use your other hand to hold your honeycomb down to avoid moving it from its position.