{"product_id":"xtool-s1-laser-lens-14mm-mineral-crystal","title":"Diode Laser Lens, Coated Mineral Crystal for S1","description":"\u003cp\u003eThese lenses are made of Mineral Glass and coated to avoid scratching and improve longevity. They can be glued, or pressure fit into most lasers. Each lens comes with a slightly polished bevel edge to give the lens a nice, finished edge.\u003c\/p\u003e\n\u003cp style=\"color: #ff0000;\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e xTool S1 10W, 20, and 40W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have other sizes please reach out via chat.\u003c\/strong\u003e IR modules doesn't use lenses like the regular modules. Buy with our brass spacer as an alternative to gluing your lens to keep it in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardened Laser Mineral Lens\u003c\/strong\u003e\u003cbr\u003eLaser lenses are consumables and they need to be cleaned regularly. It is better to use Isopropyl alcohol and a cotton swab to remove any grease or glue vapor from cutting your materials. From time to time please replace your lens to ensure the full power of your laser goes to your material.\u003c\/p\u003e\n\u003cp\u003eUsing our brass spacer with our lenses will help to prevent the lens from moving without having to glue! It’s a faster and more effective way to keep your lens clean and easier to replace.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis lenses were run for 100 hours on a 20w laser at 100% power to ensure durability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 30px 0px 15px 0px;\"\u003eHere is a quick video on how will work and what you need\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 30px 0px;\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/youtu.be\/7vH-HcrGIGw\" style=\"background-color: #eb222c; color: #fff !important; padding: 10px 20px; border-radius: 10px;\" target=\"_blank\"\u003eNew Brass Spacer\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOT TESTED ON CO2 or FIBER LASERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLenses are 1 mm thick\u003c\/li\u003e\n\u003cli\u003ePlease verify that the lens housing diameter is 14 mm\u003c\/li\u003e\n\u003cli\u003eSilica is used to make these lenses scratch resistant\u003c\/li\u003e\n\u003cli\u003eMade of hardened mineral glass to resist breakage and be long lasting\u003c\/li\u003e\n\u003cli\u003eHave beveled edges\u003c\/li\u003e\n\u003cli\u003eCrystals are flat on both sides\u003c\/li\u003e\n\u003cli\u003eEasily fit most lasers and can be glue or pressure fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to replace your lens:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the lens housing from your laser module. If it is glued, soak it in acetone for an hour or two to soften the glue. Push the lens out of the housing.\u003c\/li\u003e\n\u003cli\u003eIf the lens uses a screw lock nut, it will most likely also be glued. Use the same method described above and remove the lock nut to release the lens from housing.\u003c\/li\u003e\n\u003cli\u003eAdd some high temperature silicone or sealant to glue the lens back to the housing. \u003cstrong\u003e(Do not add a lot, just a little drop will go a long way)\u003c\/strong\u003e. \u003cspan style=\"color: red;\"\u003e\u003cstrong\u003eThis is optional\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd the lens carefully making sure no glue is on the center of your lens and let it dry according to your glue instructions \u003cstrong\u003e(Do Not put the housing back on the laser until is completely dry, some glues release fumes and can damage your main lens inside the module) \u003cspan style=\"color: red;\"\u003eIf you didn’t glue the lens skip this step\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003ePut your housing back on your module and enjoy. Remember lenses are laser consumables and you need to clean them regularly between jobs.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"AlivePixel","offers":[{"title":"Lens and Brass spacer (new version)","offer_id":46807281041557,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"Brass Spacer (new version)","offer_id":46807281008789,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Lens only (14mm)","offer_id":46807281074325,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6388\/3157\/files\/hlml_new_04.jpg?v=1767422484","url":"https:\/\/alivepixelcreates.com\/products\/xtool-s1-laser-lens-14mm-mineral-crystal","provider":"AlivePixel Creates","version":"1.0","type":"link"}